How to setup receipt and KOT on the same printer

Table of Contents

This document will guide you in setting up receipts and KOT printouts for the same thermal printer

Procedure #

For setting up a thermal printer please refer: https://www.saleculator.com/documentation/printer-setup/

For setting up a KOT please refer
https://www.saleculator.com/documentation/how-to-setup-kot-printing/

Setting up the same printer for both receipt and KOT:

  1. Administration Menu > Maintenance > Resources
  2. Under Resources click Printer.KOT1 from the left side menu
  3. On the scripts page line# 19 change the printer number from 2 to 1

4. Click the save button from the top menu bar

5. Click Printer.KOT1_Change from the left side menu

6. On the scripts page line# 19 change the printer number from 2 to 1

7. Click the save button from the top menu bar

8. System Menu > Configuration > Click Periperals Tab

9. Keep the same settings for Printer 2 as it was set for Printer 1 (i.e., Printer, Mode, and Port should be the same for both)

10. Click the Save button at the bottom right side

11. Restart the system

0 Comments

Leave a Reply

Arrow-up